20'-40'-45' City 3-Axle Chassis

Carries one 20', 40', or 45' ISO container. Applicable to operation in Canada.

20-40-45-tri-axle-t.jpg

By use of telescopic action, this unique extendable trailer chassis can grow from 30’ 6” to 45’ 6” in order to accommodate a 20’, 40’ or 45’ shipping container with a GVWR of 59,400, 90,000, and 90,000 lbs. respectively.  The versatility and stability of this tri-axle chassis is what makes it such a great addition to any fleet looking to carry a variety of containers.

General Specs

Tare Weight:
Approximately 9,700 lb.
GVWR:
20' Closed position: 59,400 lb.; 40'-45' Extended positions: 90,000 lb.
Steel & Fasteners:
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated
Main Beams:
Wide flange I-Beam
Cross Member:
Fabricated steel
Upper Coupler Assembly:
5/16"-thick pick up plate
Fifth Wheel Height:
48 inches
Front Bolster:
Fabricated channel with steel casting end plates
Rear Bolster:
Channel type
Intermediate Bolsters:
6" × 8" tube
ICC Bumper:
Tube: 47" long
Mud Flaps:
24" × 30" white plastic
Electrical System:
12 volt, 7-way split pin receptacle plug; modular wiring harness
Slider Mechanism:
Air-operated locking pins
Overall Length Closed:
29.6 feet
Overall Length Extended:
40' position: 40.5 feet; 45' position: 45.5 feet
Gooseneck Beams:
Fabricated I-beam with high-tensile steel

Dimensions

Overall Chassis Width:
102 inches
Maximum Rear Height:
48 inches

Landing Gear

Landing Gear:
Two speed AAR approved, square leg. 55,000-lb. lift capacity and 160,000-lb. static load capacity.
Landing Gear Foot Group:
10" × 10" low profile sandshoe
Crank Handle Location:
Roadside

Lighting

Light Attachment:
Flange mounted
Light Type:
LED

Brakes

Drum:
Steel outboard mounted
Lubrication:
Oil 90 W
Brake System Type:
2S1M
Brake Chambers:
30/30

Wheels

Rims:
Steel 22.5" × 8.25" hub piloted
Tire Size:
11R 22.5
Hub Type:
Steel

Axles

Axle Type:
5" round, tapered, 77.5" long
Axle Quantity:
Three
Axle Centers:
60.75 inches
Triaxle Location:
85.75 inches from rear to middle axle center
Kingpin Location:
24 inches from rear face of front bolster

Suspension

Suspension Type:
Three-leaf spring ride

Finish

Metal Preparation:
Clean, dry steel and NACE No. 3 /SSPC-SP-6 commercial blast cleaning
Primer:
Zinc-rich primer
Topcoat:
Black urethane

RE: 20'-40'-45' City 3-Axle Chassis

Would you like to receive more information about the 20'-40'-45' City 3-Axle Chassis? Fill out the simple form below, and a Cheetah Chassis representative will contact you.

*
*
*
*
*

Privacy: Cheetah Chassis does not send unsolicited email (SPAM) or share your email address with anyone.